-
2026-07-05 14:42:27
Practical guide for automotive transmission cover die casting, covering oil passage cleanliness, sealing face control, bolt pattern accuracy, CNC datum and packing.
-
2026-07-04 14:10:11
Technical guide for ribbed electronic housing die casting, covering wall balance, cover fit, sealing faces, coating masking, grounding points and inspection planning.
-
2026-07-04 14:10:08
Buyer guide for multi port valve connector die casting, explaining port alignment, threaded holes, leak risk, CNC datum planning, cleaning and inspection.
-
2026-07-04 14:10:05
Engineering guide for heat sink housing die casting, covering rib thickness, thermal contact face, flatness, porosity risk, CNC machining and inspection evidence.
-
2026-07-03 12:02:41
FAQ guide for precision aluminum motor housing cover die casting, answering buyer questions about bearing fit, concentricity, machining, coating and sample approval.
-
2026-07-03 12:02:38
FAQ guide for pump end cover housing die casting, answering buyer questions about sealing faces, threaded holes, machining datum, leak risk and inspection.
-
2026-07-02 11:14:04
Buyer guide for round bearing end cover housing die casting, covering bore fit, face runout, machining datum, burr control and packing protection.
-
2026-07-02 11:14:01
Technical guide for circular motor end shield die casting, explaining bearing seat machining, vent slot burrs, final fit, coating and inspection.
-
2026-07-02 11:13:58
Buyer guide for round motor mounting cover die casting, covering concentricity, screw pattern, vibration control, CNC datum and inspection planning.
-
2026-07-01 09:52:46
Buyer guide for automotive gearbox support housing die casting, explaining load path review, machined mounting pads, bolt pattern inspection, coating and traceability.
-
2026-07-01 09:52:42
Technical guide for round fan motor end cover die casting, covering air gap control, bearing support, noise risk, airflow clearance, machining datum and inspection.
-
2026-07-01 09:52:38
Buyer guide for pipe connector housing die casting, covering thread engagement, sealing shoulder design, internal burr control, cleanliness and inspection planning.
-
2026-06-30 11:03:34
Engineering guide for small motor housing cover set die casting, covering matched parts, batch consistency, assembly fit, coating consistency and inspection planning.
-
2026-06-30 11:03:31
Buyer guide for gearbox cover plate die casting, covering oil sealing face control, rib stiffness, machining datum, bolt pattern inspection and packing protection.
-
2026-06-29 08:49:22
Technical guide for tapered motor bracket housing die casting, explaining draft direction, mounting face control, rib support, machining datum and inspection needs.
-
2026-06-29 08:49:20
Buyer guide for oval mounting bracket plate die casting, covering slotted hole tolerance, load direction, mounting datum, coating masking and inspection planning.
-
2026-06-28 11:46:02
Buyer guide for electronics mounting base plate die casting, covering PCB standoffs, grounding pads, flatness, coating masking, threaded holes and inspection.
-
2026-06-28 11:45:59
Engineering guide for steering pump housing die casting, covering pressure zones, shaft alignment, port machining, leak risk control and inspection planning.
Altogether 140 article， Every page shows：18 article
Español
Pусский
Français
日本語
WhatsApp
Phone