-
2026-07-15 13:29:38
Technical guide for aluminum die casting valve housing, covering port alignment, sealing faces, pressure testing, thread control, cleaning and inspection.
-
2026-07-15 13:29:35
Buyer guide for painting and coating die casting parts, covering masking areas, adhesion checks, thread protection, visible surfaces and export packing.
-
2026-07-15 10:31:16
Engineering guide for tapered motor bracket housing die casting, covering rib transition, mounting stiffness, CNC datum, wall balance, coating and inspection.
-
2026-07-15 10:31:13
Buyer guide for round fan motor end cover die casting, covering ventilation openings, bearing alignment, CNC machining datum, coating control and inspection.
-
2026-07-13 10:47:37
Buyer guide for electronics control box cover die casting, explaining gasket grooves, EMI contact, coating masking, screw bosses, CNC machining and inspection.
-
2026-07-13 10:47:34
Engineering guide for engine gearbox housing die casting, covering datum control, oil cavity cleanliness, machined interfaces, sealing faces and inspection.
-
2026-07-11 11:15:46
Buyer guide for gearbox cover plate die casting, explaining gasket face flatness, bolt pattern, machining datum, oil leak prevention, coating and inspection.
-
2026-07-11 11:15:43
Engineering guide for fluid valve body housing die casting, covering sealing bores, port burrs, machining sequence, leak risk, cleaning and inspection.
-
2026-07-09 10:06:19
Buyer guide for small motor housing cover set die casting, explaining matched parts, surface finish, CNC datum, batch consistency, inspection and packing.
-
2026-07-09 10:06:16
Technical guide for twin bore machinery base cover die casting, covering bore relationship, fixture datum, flatness, CNC machining, inspection and packing.
-
2026-07-08 10:10:33
Buyer guide for large structural equipment housing die casting, explaining wall balance, machining allowance, rib design, dimensional stability and export packing.
-
2026-07-08 10:10:31
Engineering guide for automotive support bracket die casting, covering load direction, mounting holes, rib layout, coating durability, CNC datum and inspection.
-
2026-07-07 09:50:33
Buyer guide for electronics mounting base plate die casting, explaining flatness, grounding points, inserts, coating masking, CNC machining and inspection.
-
2026-07-07 09:50:30
Technical guide for pipe connector housing die casting, covering thread coaxiality, sealing surface control, internal cleaning, CNC machining and inspection.
-
2026-07-06 09:52:41
Buyer guide for pipe elbow housing die casting, covering flow path burr control, wall thickness, threaded ports, pressure testing, cleaning and inspection.
-
2026-07-06 09:52:39
Technical guide for flange mount support base die casting, explaining flatness, bolt load, machined pad protection, coating masking and inspection planning.
-
2026-07-06 09:52:36
Engineering guide for pump housing support bracket die casting, covering load path, mounting face flatness, thread reliability, ribs, CNC datum and inspection.
-
2026-07-05 14:42:30
Engineering guide for gearbox side cover die casting, explaining machined datum, bearing area protection, gasket face flatness, coating masking and inspection.
Altogether 140 article， Every page shows：18 article
Español
Pусский
Français
日本語
WhatsApp
Phone